Shanghai Thenow Purification Technology Co.,Ltd.
en
Wine Cellar Cooling System
Thenow wine cellar cooling units self-contained is best suited for wine cabinets and smaller wine rooms. This unit is intended for use in cabinets of up to 15 cubic meters. Designed to lower the temperature at its best scope 10~16 degree centigrade, and maintains the humidity in your wine cabinet at optimal levels, between 50 and 75 percent. Small and compact, it is easy to set up and doesn’t require any piping or ducting, which could also help reduce the overall cost of the installation.

Wine Cellar Cooling Units Split System

Thenow wine cellar cooling units split system is intended for cellars without access to proper ventilation. They are known for their efficiency and longevity. Each unit is designed to maintain a consistent temperature and humidity in spaces where proper ventilation is not feasible. The units are functionally divided into two sections,the evaporator and the condenser. The evaporator is installed inside and the condensing unit can be placed as far as 30m away with external ductwork connections. Since it exhausts outside, split cooling systems operate quietly and reduce vibration inside the cellar, which is believed to negatively affect the quality of wine.

Wine Cellar Cooling Units Split System Features

  • Auto cooling and heating mode, keep wine cellar under constant temperature.
  • The evaporator is nickel plated for corrosion protection
  • Adopt circulating water wet-film auto control humidification system,wet film is made of Swedish organic polymer material with sterilization and disinfection function.
  • Full touch control system, famous brand sensors, stable quality and performance.
  • Pull-out design wet film module, easy to replace
  • Control constant condensation temperature
  • Three speed air flow under auto control to maintain the ideal environment for long-term wine storage
  • Can be ceiling mounted, rack mounted, or floor mounted

Wine Cellar Cooling Units Split System Cases

The specific parameters of Wine Cellar Cooling Units Split System

Model Unit HSN-J15 HSN-J30 HSN-J60 HSN-J90 HSN-J150
Cellar Size 3-10 10-30 30-60 60-90 90-150
Power P 0.5 1 2 3 5
Power Supply V/HZ 220/50 380/50
Cooling KW 1.2 2.5 5 7.5 12.5
Heater KW 1 1.6 3 6 9
Air Flow m3/h 200 350 700 1100 1250
Static Pressure Pa 30 30 30 40 50
Noise dB(A) 50 50 50 53 62
Refrigerant / R134A R410A/R407C
Controller PC Full-touch smart control
Temperature 10-16℃, ±2℃
Humidity 50~70%, ±5%
Total Power KW 1.7 2.9 4.4 8.9 14
Humidifier Type Wet-film
Humidification Kg/h 1 2 2 4 6
Indoor Unit Size L*W*H(mm) 885*375*315 945*790*300 1345*790*300 1545*790*300 1945*890*350
Outdoor Unit Size L*W*H(mm) 700*300*460 860*300*540 860*300*540 960*360*860 1010*425*1250
Tube Connection  Liquid(mm) 6.35 6.35 9.52 9.52 12.7
Gas(mm) 9.52 9.52 12.7 15.88 19.05